![]() ![]() generally speaking, the faster the tail servo responds, the gyro's gain will increase. A: Delay (Gyro Gain adjustment ) A."+"(clockwise) increase the ability of gyro to balance the helicopter (stable but less active): B"-" (counterclockwise) decrease the ability of gyro to balance the helicopter (active but less stable) Attention: When adjusting the gain of Gyro, the gain is differs when applied with different servos or different helicopters. When the tail stops rotating, the servo judges that it has stopped in that position. Also when the tail of the helicopter rotates, the servo also rotates in accordance with angle of rotation of the tail. ![]() The gyro itself will automatically auto trim to keep the helicopter flying in the same direction ie keep a heading locked. This stops drifting of the tail even in moderate/strong cross-winds. Product Features: When the helicopter encounters a cross-wind and the tail drifts, a control signal from the gyro computes the drift angle and constantly outputs a control signal that resists the cross-wind. Intermittent flashing CH5 isn't connected well, or it moved to the middle during initializing. Slow flashing Gyro can not receive the tail servo control signal from transmitter. Extinguishing Power off or the gyro is unlocked. Product Features: Esky EK2-0704B Head Lock Gyro input signal:1.5-+0.5mx input power 5v-6vdc weight:12.5g size:27*28.5*18mm Display status Status of Gyro Fast flashing After powering on, the gyro is initializing. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |